Nokia XS-2426X-A XGS PON Residential Gateway ONT (3FE49690AA)
Cisco Catalyst 2960 Series Switches
Nokia Telecom Equipment Guide:
Most In-Demand Platforms, High-Value Parts and Secondary-Market Opportunities
Nokia Telecom Equipment Guide
Major Platforms, In-Demand Part Numbers and High-Value Hardware
Nokia equipment supports some of the world’s largest carrier, broadband, data center, utility, transportation and mobile networks. Its portfolio spans IP routing, optical transport, fiber access, microwave backhaul, mobile radio access and mission-critical networking.
In today’s secondary market, demand is not distributed evenly across every Nokia product family. The strongest activity is concentrated around high-capacity IP routing, 100G-to-400G optical transport, XGS-PON and multi-gigabit fiber access, mobile backhaul, and replacement hardware for large installed networks.
Recent network deployments continue to feature the Nokia 7250 Interconnect Router, 7750 Service Router, 1830 Photonic Service Switch, Lightspan fiber platforms and AirScale radio equipment. This continued deployment activity helps support aftermarket demand for systems, line cards, power supplies, fan trays, optics and emergency spares.
That is where the secondary market plays a critical role.
Which Nokia Equipment Is Most in Demand?
From a secondary-market perspective, the leading Nokia equipment categories currently include:
| Nokia Equipment Category | Demand Level | Typical Sell Rate | Value Profile |
| 7250 IXR and 7750 SR routing | Very high | Strong | High to very high |
| 1830 PSS optical transport | Very high | Moderate to strong | Often the highest |
| Lightspan and 7360 ISAM access | Very high | Highest unit volume | Moderate to high |
| 7210 SAS and 7705 SAR | Strong | Consistent | Moderate to high |
| AirScale radio and baseband | Project-driven | Configuration-dependent | Very high |
| Wavence and 9500 MPR microwave | Specialized | Steady niche demand | Moderate to high |
| Legacy Alcatel-Lucent platforms | Outage-driven | Unpredictable | Potentially high |
The fastest-selling products are not always the most expensive. ONTs, power supplies, optics and fixed-format routers can move quickly in quantity, while coherent optical cards, core router modules and radio equipment may produce significantly higher individual transaction values.
High-Value Nokia Equipment Categories
Not all Nokia parts carry the same value in the market. The highest-cost and most actively sourced equipment typically falls into a few major categories:
Nokia 7750 Service Router
The Nokia 7750 Service Router, commonly called the 7750 SR, is one of Nokia’s most important and valuable equipment families.
It is used for:
- IP edge and core routing
- Broadband network gateways
- Provider edge routing
- Internet peering
- Mobile gateways
- Data center interconnection
- Business service delivery
- Network security and encryption
The family includes compact 7750 SR-a and SR-e systems as well as high-capacity modular 7750 SR-s platforms. Nokia positions the 7750 SR for demanding service-provider, cloud, AI infrastructure and mission-critical applications.
Representative Nokia 7750 Part Numbers
| Part Number | Description |
| 3HE07165AA | 7750 SR-12e integrated chassis |
| 3HE08421AA | SFM5-12e switch fabric module |
| 3HE08423AA | CPM5 control processor module |
| 3HE12333AA | Six-port 10/40/100G QSFP28 interface module |
| 3HE17701AA | 7750 SR ESA 400G Extended Services Appliance |
| 3HE10550AA | 100GBASE-LR4 QSFP28 optical transceiver |
| 3HE10551AA | 100GBASE-SR4 QSFP28 optical transceiver |
Switch fabrics, control processors, high-density 100G or 400G interface cards, service appliances and complete chassis configurations generally command the highest values within the 7750 family. Public secondary-market listings also demonstrate that complete SR-12e bundles and high-capacity modules can carry significantly higher values than fixed-form-factor systems.
Why the 7750 SR Sells
Demand is supported by the platform’s large installed base, high-capacity routing capabilities and use across core, edge, mobile and broadband applications. Buyers frequently need exact hardware revisions to expand an existing node or replace a failed component without changing the surrounding network design.
Complete, tested configurations generally sell better than incomplete chassis because buyers may also need:
- Matched control processors
- Switch fabric modules
- Power supplies
- Fan trays
- Interface cards
- Memory
- Software compatibility
- Required mounting and power accessories
Nokia 7250 Interconnect Router
The Nokia 7250 IXR family is one of the strongest current secondary-market opportunities.
The platform supports aggregation, data center, mobile, residential, business access and edge applications. Fixed and modular variants are available for service-provider, enterprise and web-scale environments.
Representative Nokia 7250 IXR Part Numbers
| Part Number | Description |
| 3HE14782AA | 7250 IXR-e with 24 SFP+, eight SFP28 and two QSFP28 ports |
| 3HE14785AA | DC power supply for the 7250 IXR-e |
| 3HE15774AA | 7250 IXR-ec with six 10GE SFP+, twenty 1GE SFP and four copper ports |
The 3HE14782AA is particularly attractive for aggregation environments requiring a combination of 10G, 25G and 100G interfaces in a compact platform. The 3HE15774AA IXR-ec is better suited to lower-capacity access, aggregation and utility applications requiring a mix of fiber and copper connectivity.
Why the 7250 IXR Has a Strong Sell Rate
The 7250 IXR fits several active network requirements:
- 10G-to-100G network upgrades
- Distributed access and aggregation
- Mobile transport
- Data center fabrics
- Utility and critical infrastructure networks
- Compact edge deployments
- Port extension for larger Nokia routing environments
Nokia has continued expanding the 7250 portfolio for utility and mission-critical networks, while major operators have selected the platform for current IP network modernization projects.
Nokia 7210 Service Access Switch
The Nokia 7210 SAS family provides Carrier Ethernet demarcation, access, aggregation and IP routing.
Common applications include:
- Business Ethernet
- Mobile backhaul
- Residential aggregation
- Network demarcation
- Utility communications
- Metro Ethernet
- Access-ring modernization
Representative Nokia 7210 SAS Part Numbers
| Part Number | Description |
| 3HE10530AB | 7210 SAS-S 48F4SFP+ system |
| 3HE10492AB | 7210 SAS-Sx 46F2C4SFP+ system |
| 3HE10076AB | 7210 SAS-Mxp system |
| 3HE11597AA | 7210 SAS-Sx with 64 SFP and four QSFP28 ports |
Fixed 7210 systems often sell faster than large modular chassis because they are easier to configure, ship and deploy. Demand is particularly strong when the equipment is supplied with the correct power supplies, rack hardware and software-compatible revision.
The 7210 SAS remains important in networks that standardize on Nokia SR OS and need smaller access systems that integrate with larger 7750 or 7705 environments.
Nokia 7705 Service Aggregation Router
The Nokia 7705 SAR family combines IP/MPLS routing with support for legacy, Ethernet, cellular and mission-critical interfaces.
It is widely used in:
- Utility and smart-grid networks
- Public safety
- Transportation
- Mobile backhaul
- Industrial communications
- SCADA environments
- Microwave-connected networks
- Remote field locations
Nokia continues to position the 7705 SAR for communications service providers, enterprises and mission-critical infrastructure.
Representative Nokia 7705 SAR Part Numbers
| Part Number | Description |
| 3HE05653AA | 7705 SAR-M compact service aggregation router |
| 3HE06151AA | A8-1GB-SFP adapter card |
| 3HE12473AA | 7705 SAR-Hmc North American cellular variant |
| 3HE12479AA | 7705 SAR-Hmc 5G variant |
| 3HE12343AA | Outdoor 2G/3G/4G omnidirectional antenna |
The 3HE12473AA supports North American cellular bands, including CBRS applications, while the newer 3HE12479AA extends the rugged SAR-Hmc platform into 5G-connected applications.
Why 7705 SAR Equipment Moves Quickly
The platform is frequently deployed in environments where downtime is unacceptable and complete platform replacement is difficult. That creates demand for:
- Exact replacement routers
- Adapter cards
- Cellular modules
- Power supplies
- Timing components
- Ruggedized accessories
- Antennas
- Software-compatible hardware revisions
A single discontinued component can become extremely valuable when it is required to restore a utility, transportation or public-safety circuit.
Nokia 1830 Photonic Service Switch
The Nokia 1830 PSS is Nokia’s principal optical and DWDM transport family.
It supports metro, regional, long-haul and data center interconnection applications, including:
- 10G, 100G, 200G, 400G and higher-speed services
- Coherent optical transport
- ROADM networks
- Optical amplification
- OTN switching
- Data center interconnection
- C-band and C+L-band networks
- Quantum-safe transport applications
Nokia introduced new high-capacity 1830 PSS shelves for commercial availability in the second quarter of 2026. The platform is also being selected for new optical networks supporting 400G services, AI-scale computing and data center connectivity.
Representative Nokia 1830 PSS Part Numbers
| Part Number | Description |
| 3KC19274AA | PSS-36 1.9 Tb/s matrix |
| 3KC19175AA | 1830 PSS channel manager shelf |
| 8DG62186AA / 8DG62186AB | 260SCX2 200G add/drop optical transponder |
| 8DG62474AA | MCS8-16 multicast switch |
| 8DG62519AA | WR20-TFM wavelength-selective switch |
| 8DG63101AA | L-band multicast selective switch module |
| 8DG63768AA | L-band dual-amplifier array |
These parts are representative examples only. The 1830 family contains numerous shelf, transponder, muxponder, amplifier, wavelength-selective switch, matrix, controller and power configurations.
What Is Most Valuable in the 1830 PSS Family?
The highest-value 1830 equipment typically includes:
- Coherent 100G, 200G, 400G and higher-speed cards
- Wavelength-selective switches
- ROADM components
- C+L-band equipment
- High-capacity matrices
- Multicast switches
- Complete configured shelves
- Specialized amplifiers
- New or new-open-box optical modules
Value depends heavily on revision, software support, licensing, wavelength application and whether the card is compatible with the buyer’s existing shelf and network release.
Nokia Lightspan FX and 7360 ISAM
The Nokia Lightspan FX, previously identified heavily with the 7360 ISAM FX family, is one of the most active Nokia product groups in the fiber-access market.
The platform is available in three principal sizes:
- FX-4
- FX-8
- FX-16
It can support GPON, XGS-PON, 25GS-PON, point-to-point Ethernet and other fiber-access technologies depending on the cards and software configuration.
Representative Lightspan FX and 7360 ISAM Part Numbers
| Part Number | Description |
| 3HG01577HA | FX-4 redundant Lightspan starter kit |
| 3HG01578VA | FX-8 redundant Lightspan starter kit |
| 3FE64991AB / 3FE64991BB | FX-4 shelf variants |
| 3FE64936BB | NFXS-E FX-8 shelf |
| 3FE67300AA | FX-8 ANSI horizontal installation kit |
| 3FE74828BC | FANT-H network termination and controller card |
| 3FE74981AA | FWLT-C 16-port Multi-PON line card |
| 3FE72955AA | FWLT-B eight-port universal NG-PON card |
| 3FE48118AC | XS-250X-A XGS-PON ONT |
The FWLT-C is especially important because it provides flexibility across multiple PON technologies, helping operators migrate subscribers without replacing the entire OLT platform.
Why Fiber-Access Equipment Has One of the Best Sell Rates
Fiber-access demand is driven by:
- Continued fiber-to-the-home construction
- GPON-to-XGS-PON upgrades
- Business 10G services
- New broadband operators
- Rural broadband construction
- Expansion of existing Nokia OLT networks
- Need for compatible ONTs
- Emergency replacement of OLT control and line cards
Complete starter kits generally sell better than bare shelves because a usable OLT requires the correct shelf, controllers, line cards, power arrangement, optics, cabling and software configuration.
XGS-PON ONTs can also produce high unit-volume opportunities. However, buyers must confirm that the ONT is compatible with the OLT software, provisioning system, operator profile and intended enclosure.
Nokia AirScale Mobile Network Equipment
The Nokia AirScale portfolio includes baseband systems, Massive MIMO radios, remote radio heads, indoor radio solutions and supporting 4G and 5G network equipment.
Current AirScale families and technologies include:
- AirScale baseband
- Habrok Massive MIMO radios
- Pandion remote radio heads
- Doksuri radios
- ReefShark-powered processing
- Indoor and small-cell radio solutions
Nokia announced additional AirScale radio products in March 2026 and new commercial deployments involving current-generation baseband and radio equipment during July 2026.
AirScale equipment can be extremely valuable, but secondary-market demand is more specialized than demand for routers or OLT equipment. Buyers must verify:
- Frequency band
- Output power
- Supported technology
- Country authorization
- Operator configuration
- Baseband compatibility
- Software and feature licensing
- Connector and antenna configuration
Nokia radio part numbers are highly configuration-specific. A matching physical appearance does not establish compatibility.
Nokia 7950 XRS and High-Capacity Core Routing
The Nokia 7950 Extensible Routing System is designed for extremely high-capacity core, peering and aggregation environments.
Large 7950 XRS chassis, line cards, fabrics and control modules can be among the most expensive Nokia assets on the secondary market. However, turnover is generally slower than compact 7250, 7210 or 7705 systems because the buyer pool is smaller and configurations are highly specific.
The strongest opportunities normally involve:
- Complete systems
- High-capacity interface modules
- Matched switch fabrics
- Control processors
- Power systems
- Tested spare configurations
- Equipment already standardized in a carrier network
Nokia Microwave and Mobile Transport Equipment
Nokia’s microwave portfolio includes the 9500 MPR and newer Wavence equipment.
These systems support:
- Mobile backhaul
- Utility communications
- Remote network access
- Microwave aggregation
- Packet transport
- Rural connectivity
- Private and mission-critical networks
Microwave equipment requires especially careful part-number verification because radios and outdoor units are frequency-band specific. The buyer may also need the correct modem card, indoor unit, antenna interface, diplexer, power system and licensing.
Legacy Nokia and Alcatel-Lucent Equipment
Older Nokia and Alcatel-Lucent platforms remain important because many networks cannot be migrated immediately.
Frequently requested legacy families include:
- 7450 Ethernet Service Switch
- 1665 Data Multiplexer
- 1850 Transport Service Switch
- 1870 Transport Tera Switch
- 9500 MPR
- Older 7210, 7705 and 7750 generations
- Legacy ISAM and access equipment
- SONET/SDH, TDM and multiservice transport hardware
Legacy equipment may not generate consistent daily demand, but requests can become urgent when a carrier, utility or service provider experiences a failure.
Scarce control cards, power modules, interface cards and common spares can sell quickly when they are tied to a large installed base.
Which Nokia Equipment Is the Most Expensive?
The highest-value Nokia equipment usually falls into five groups.
1. Complete 7750 SR-s and 7950 XRS Systems
High-capacity routing configurations can include chassis, redundant processors, multiple switch fabrics, high-speed line cards, power systems, software and licenses.
2. Nokia 1830 PSS Coherent and ROADM Equipment
Coherent transponders, wavelength-selective switches, C+L-band equipment, amplifiers and high-capacity matrices are among the most valuable individual Nokia cards.
3. AirScale Baseband and Radio Configurations
Current-generation Massive MIMO radios and complete base-station configurations can carry significant value when they match an active operator deployment.
4. Lightspan FX Multi-PON Configurations
Complete FX-4, FX-8 and FX-16 systems with redundant FANT-H cards and Multi-PON line cards are significantly more valuable than empty OLT shelves.
5. High-Speed Interface Cards and Optics
100G, 400G and higher-speed router and optical modules often hold more value than older chassis because they deliver the capacity required for network expansion.
What Determines the Value of Nokia Equipment?
Two units with the same general platform name may have very different values. Important factors include:
Exact Nokia part number
Full revision suffix
HECI or CLEI code
Hardware condition
New, new-open-box or refurbished status
Software release
Active licensing
Port speed and density
Frequency band
Optical reach or wavelength
Included power supplies
Included controllers and fabrics
Completeness of the configuration
Testing documentation
Current installed-base demand
End-of-sale or end-of-support status
This is where working with an experienced telecom equipment partner becomes important.
Why Work With TELECOMCAULIFFE – A PICS Telecom Team?
Sourcing Nokia equipment requires more than locating a part number online.
TELECOMCAULIFFE – A PICS Telecom Team helps network operators, service providers, contractors, utilities, asset managers and equipment buyers:
- Identify the correct Nokia part number and revision
- Cross-reference HECI and CLEI codes
- Confirm platform and application compatibility
- Build complete chassis and shelf configurations
- Locate difficult-to-source and discontinued equipment
- Reduce OEM lead times
- Evaluate new and refurbished alternatives
- Support legacy and end-of-life networks
- Recover value from surplus and decommissioned assets
- Coordinate testing, logistics and responsible recycling
With more than 30 years of telecom-industry experience, global inventory resources and a lifetime warranty, our role is not simply to sell available hardware.
We help customers determine what they actually need, verify that the equipment will fit the application and develop a sourcing strategy that reduces cost, risk and lead time.
Buying or Selling Nokia Equipment?
Whether you are expanding a Nokia network, replacing a failed card, planning a fiber build or removing surplus assets, the first step is accurate equipment identification. Provide as much of the following information as possible:
- Nokia part number
- Description
- Required quantity
- Condition requirement
- HECI or CLEI code
- Platform
- Current software release
- Required delivery date
- Photographs of equipment labels
- Complete BOM, when available
Contact us to buy, sell or source Nokia 7750, 7250, 7210, 7705, 7950, 1830 PSS, Lightspan FX, 7360 ISAM, AirScale, microwave and legacy Nokia network equipment.
The TELECOMCAULIFFE Difference
TELCOMCAULIFFE, A PICS Telecom Team, is a leading global distributor of telecom products and network equipment, offering an expansive selection of new, surplus, and refreshed products from over 1000 manufacturers. When you buy from the TELCOMCAULIFFE Team you’ll experience a wide range of benefits that not all OEMs or vendors offer.
- 7 Experienced Dynamic Professionals Working to Ensure the Best Pricing, Quickest Turnaround, And Highest Quality Equipment
- Standard Lifetime Warranty with Advanced Replacement
- State-of-the-Art Test Facilities and Repair Services
- 24/7 Online Customer Service
- Dedicated Marketing Professional to Sell Your Surplus Equipment
- Follow-Up Process to Ensure Customer Satisfaction